From generative design and light-weighting to software simulation and decentralized production, the transition to digital manufacturing promises to unlock an enormous amount of potential. Yet, large organizations – including military, aerospace, and automotive –struggle to fully capitalize on this potential, partly due to the complexities of integrating these technologies as an enterprise-wide solution.
An ideal platform would combine the capabilities of automated design for additive manufacturing (DfAM), additive manufacturing build preparation with machine learning, data analytics, and manufacturing execution systems (MES) into one interface. The belief is that such a combined interface would slash design cycle times from weeks to hours, decrease project costs, and perfect part quality. Additionally, supply chain complexities would be virtually eliminated because components could be designed in one part of the world and printed anywhere else on the planet, or even in space, with a push of a button.
The U.S. Navy has been tackling this problem. Recently, through a Small Business Innovative Research (SBIR) project, it requested bids on the development of an end-to-end additive manufacturing (AM) system that could be used across the entire Department of Defense (DoD).
“The Navy was looking for a streamlined process that would also have auditability and compliance certification,” explains Dr. Michael Bogomolny, Co-founder and Chief Technology Officer at ParaMatters Inc., a California-based industry-leading DfAM and generative design software provider. “I think CAD / CAM Services was intuitive enough to know that this solution just can’t be done by any one player.”
CAD / CAM Services is a Texas-based prime contractor for the U.S. federal government. It was brought in to integrate the commercial-off-the-shelf (COTS) technologies into a single interface, which would enable the DoD to manage and scale its AM processes.
“As a starting point, the Navy wanted to solve the increasingly problematic issues of supply chains and logistics for, let’s say, an aircraft carrier in the middle of the Indian Ocean that needs a specific part immediately,” says Scott Shuppert, CEO of CAD / CAM Services. “They want to be able to just push a button and have that part start printing directly on the ship’s 3D printer or the closest one available.”
To accomplish this task, Shuppert and his team had to provide a workable solution for each step along the lifespan of a part, from development and certification to service and replacement.
Starting on the frontend
“Eventually, the Navy and the DoD want to have a complete repository of every single part in its arsenal cataloged, certified, and ready to be digitally manufactured by a 3D printer anywhere in the world,” says Shuppert.
Thus, each component must undertake a thorough assessment of its design. For example, as a starting point, is the part even capable of being digitally manufactured?
“Think of the rotor blade on a helicopter. It is too big to be 3D printed, at least right now. So, that part gets rejected,” says Shupert. “Maybe the part has to be manufactured using an exotic metal or complex geometry which is not currently possible for AM. That would also get dropped.”
If the part is deemed acceptable, is it best suited for additive or subtractive manufacturing? Could it be improved through generative design or material science? Does it need digital simulation and/or finite element analysis (FEA)?
“For the DfAM and generative design aspect of the system, we wanted to remove as much of the human element as possible from the design process. ParaMatters’ platform does this through additive simulation and FEA,” says Shuppert. “This made them our first choice for the Navy project because it reduces the complexity of having to integrate more than one system on the front end.”
With the ParaMatters’ platform, the Navy can input the characteristics it needs for a specific component and the software will optimize it through testing, simulations and inspection. The software selects the appropriate material, determines the best orientation for printing, where to include support structures, nests the parts on the build tray, and generates all slicing data for each component. It is also technology and material agnostic which was a critical feature for the Navy.
Through generative design, this approach will improve weight versus performance, structural integrity, and a variety of material properties. It can also reduce the number of parts required in an assembly by combining them into a single printed piece.
“This is something that human knowledge wouldn’t be able to do in the first step of the design process,” says Bogomolny. “So, you are then shortening the design cycle by an order of magnitude.”
These elements are then incorporated into a machine learning system that uses artificial intelligence (AI) to ensure future design work becomes even smarter.
“The AI engine in the design phase has learning and heuristics capabilities,” says Dr. Bogomolny. “It creates repeatability, accuracy, standards, and the ability to streamline the operation through remembered systematic processes that can be applied repeatedly allowing automation to begin taking place in developing the output.”
Beyond manufacturing execution
Once a component has gone through the DfAM and simulation processes it then can automatically move to a manufacturing execution system provided by AMFG. Headquartered in Austin, Texas, AMFG designs MES and workflow software that enable businesses to more easily shift to digital manufacturing.
The AMFG software manages the production of the additive or subtractive manufacturing system. This includes auto scheduling, auto routing of parts, and managing all 3D printers – both internally for the Navy, or manufacturer, as well as any external solutions that may be required.
“The system will guide certain decisions like logistically where that part should be produced based on certain requirements, based on resources, and any complexities within the workflow to execute that project effectively,” says Luke Bierman, head of U.S. sales for AMFG.
However, it will go beyond the execution and management of these manufacturing systems. It is also able to capture data-driven insights from the beginning concept through to the end of the process where that component has now been validated or certified.
“This is where it gets to be cutting edge, because you can take that data from the entire process and continually improve that part,” explains Shuppert. “Not only are you going to be making them faster and more efficiently, but each component can be easily revised as technology advances.”
The system can also capture intelligence around what is actually happening to the component throughout its lifecycle, known as product lifecycle management (PLM). This data would be used to create a digital twin that will provide further insights into both the part’s design and maintenance requirements.
“Let’s say you have a component that needs to be switched out every four years,” says Bierman. “The software can then schedule a replacement component to be printed and delivered right before that maintenance is set to occur. So, you can see where this begins to create a smart industry that is both proactive and intuitive.”
The data could also reduce the heavy burden currently being placed on the DoD and the Defense Logistics Agency (DLA) by minimizing, or even eliminating, supply chain problems and the need for massive areas of inventory.
“If you’re able to execute components anywhere in the world in under 24 hours, maybe you don’t produce and store all these components in order to satisfy some sort of critical inventory,” says Bierman. “You could now just create them on-demand using a virtual inventory.”
Inspection and certification
Quality, security, and traceability were also key factors for this new integrated system. For the DoD, parts must be certified before they can be deployed for service.
“Every part has to meet certain requirements, whether that is AS9100 for aerospace, IATF 16949 for automotive, or a certified part for the Navy,” explains Bierman. “Through this platform, we can verify that the component is 100% capable of being used for its application.”
That process begins as soon as the part is manufactured and then inspected with either an industrial CT scan or laser scanning device. The software takes the original CAD file and can find any geometrical deviations and advance or eliminate the component automatically. These capabilities can be further expanded when needed to incorporate non-linear acoustics or wave stimulation – like MASER – as the inspection method.
All the inspection data is again processed back into the AI where it is able to learn how to decrease the number of disqualified parts in the future.
“Once that’s certified, we can take all that metadata and upload it into a repository of certified components that going forward can be consistently executed around the globe at any site that meets those requirements to execute that with the same exact process,” says Shuppert.
That repository of data analytics could then be applied to future projects for not just the Navy, but across the entire military supply chain.
The final goal of this strategy was to optimize cybersecurity protections throughout the process. This requires the digital manufacturing interface to adhere to any Cybersecurity Maturity Model Certification (CMMC) level requested by the Navy, which can be as high as Level V. The DoD is also looking to increase the security of its digital data and network connections. As part of that, digital twin technology will be used to validate and prevent tampering with the DoD’s digital supply chain.