Webinar and Product Demo: Simulation-Driven Design of Machinery and Mechanisms

Prototyping products with moving parts is difficult, time consuming and costly. Early validation of how a mechanism or machine is going to perform is critical in validating functional performance and determining if the design will withstand service loads.


Prototyping products with moving parts is difficult, time consuming and costly. Early validation of how a mechanism or machine is going to perform is critical in validating functional performance and determining if the design will withstand service loads.

As a result, simulation has become a necessary component of the development process. Without simulation, shorter lead times can lead to short-cuts in the design and validation process, resulting in parts and assemblies that are heavier, less efficient and costlier to manufacture.

In this webinar you will learn:

  • How dynamic simulation can be used as early as the concept stage, by both designers and engineers
  • How simulation is used to model various machinery and mechanisms
  • How dynamic simulation loads can be utilized in an FE analysis or topology optimization
  • Simulation tools like Inspire Motion and MotionSolve
  • About the Speaker:


    Scott Ziemba is an application specialist with Altair Engineering. He helps clients create motion simulations for both concept design and analyst verification.

    Ziemba has almost 20 years of experience supporting, teaching, using and selling FEA and other simulation software.

    PDH Certificates will not be provided for the recorded webinar. We apologize for this inconvenience.

    Your attendance at this webinar is sponsored by Altair. To watch, please complete the form on this page.