New products from ABB, Argotec, Bronkhorst, Energid and FESTO.
ABB SCARA Robot
ABB introduced its invert-mounted IRB 910INV SCARA robot. By mounting the IRB 910INV on ceilings, manufacturers can increase the space efficiency and flexibility of each cell and do more complex tasks in confined spaces. The ceiling mounting also allows the IRB 910INV to collaborate with other robots and machines simultaneously in the same footprint, further boosting productivity.
The IRB 910INV will eventually be certified for clean room applications. The robot is available in two variants. One has a maximum payload of 3kg with a 350mm reach, and the other has a maximum payload of 6kg with a 550mm reach.
For more information, visit ABB’s website.
Argotec ATENA for Nanosatellites
Argotec has launched Advanced Testing Emulator for Nanosatellite Arm(ATENA), aimed at testing and validating the functionality of nanosatellites. ATENA simplifies simulations of satellite performance, generally carried out through complex numerical analysis and tests of hardware, software, navigation and control algorithms, which usually return results that are difficult to interpret.
The nanosatellite, or part of it, is fastened to the wrist of the robot which, thanks to a closed-loop configuration, recreates the movement of the satellite in orbit during the different phases of a mission. This device lets designers test all the communication protocols of the system, also verifying the interactions between components.
For more information, visit Argotec’s website.
Bronkhorst Mass Flow Meter
Bronkhorst released its MASS-STREAM mass flow meter. MASS-STREAM instruments operate on the basis of direct through-flow measurement in accordance with the constant temperature anemometer principle. They contain no moving parts, and the measured gases pass through the two stainless steel sensor probes directly without bypass.
On the D-6390 model, the maximum measuring range has been expanded to 10,000ln/min air equivalent. Analogue I/O signals as well as an RS232 interface are provided by default.
For more information, visit Bronkhorst’s website.
Energid Software Development Kit
Energid introduced Actin 5, an update to its software development kit (SDK). The Actin toolkit is a real-time adaptive motion control software, allowing robotic system developers to focus on the robot’s task rather than joint movement and paths.
The Actin software responds in real time to sensory input and directs the robot on the most efficient path while avoiding collisions. The robot’s motion is updated dynamically without the need for reprogramming.
For more information, visit Energid’s website.
FESTOLinear Axes ELGC
FESTO announced its linear axes ELGC and mini slide EGSC. These electric actuators offer a common system approach and platform architecture, as well as adapter-free connectors.The use of space that characterizes both the spindle and toothed belt axes ELGC and the mini slide EGSC is useful for assembly, testing, inspection, small parts handling and desktop applications.
The spindle and toothed belt axes ELGC with its internal, protected recirculating ball bearing guide is suitable for X, Y and Z-axes applications. The mini slide EGSC is ideal for Z-axis movements or guided linear individual movement in any mounting position.
For more information, visit FESTO’s website.
Missed last week’s Latest Production Tech? Click here.