Auto loan “bubble” could lead to a much longer refresh cycle for new cars
Image courtesy GM
Economic activity in the manufacturing sector expanded in January for the 20th consecutive month, and the overall economy grew for the 68th consecutive month, say the nation’s supply executives in the latest Manufacturing ISM Report On Business.
Automotive still a major driver of manufacturing overall
Overall, the numbers look good. Low commodity prices, specifically oil, have yet to fully filter their way through the supply chain. Most petroleum industry pundits predict that lower oil pricing will not mean a significant decrease in drilling activity, but will tighten margins on the supplier industries.
The Automotive industry is still surprisingly strong, primarily as a result of very low interest financing rates and the return of retail leasing. Automotive is a major component of any Manufacturing Index and is historically cyclical, suggesting some softening in 2016.
An unanswered question in the sector is the lengthening of the replacement cycle. New vehicles in most popular categories are increasingly expensive, and are now routinely financed over six or more years. Depending on depreciation, it is still possible to be “upside down” during the latter years of the financing term, meaning an owner that owes more on the vehicle than it is worth at trade in. This prevents owners from making a new vehicle purchase before the end of the full financing term.
The financing itself is another issue that is rarely reported. David Stockman is a former Reagan administration budget chief. He has a useful analysis that suggests that auto loans represent a major banking “bubble” similar to the subprime mortgage fiasco of 2008. His analysis is here.
The key to sustainable manufacturing growth will be in strengthening in demand for consumer durables outside the auto sector, driven by wage growth in part from re-shoring. With interest rate policy essentially ineffective as a job creation tool (there’s no downside room left for rates) direct stimulative measures are now essential. Whether a GOP-controlled legislative will support such measures is doubtful.
Most industry groups were up in January, but not all
The report was issued today by Bradley J. Holcomb, “The January PMI registered 53.5 percent, a decrease of 1.6 percentage points from December’s seasonally adjusted reading of 55.1 percent. Comments from the panel indicate that most industries, but not all, are experiencing strong demand as 2015 kicks off. The West Coast dock slowdown continues to be a problem, negatively impacting both exports and imports as well as inventories.”
Of the 18 manufacturing industries, 14 are reporting growth in January in the following order:
· Primary Metals
· Wood Products
· Printing & Related Support Activities
· Miscellaneous Manufacturing
· Fabricated Metal Products
· Electrical Equipment
· Appliances & Components
· Petroleum & Coal Products
· Paper Products
· Transportation Equipment
· Chemical Products; Machinery
· Food, Beverage & Tobacco Products
· Computer & Electronic Products
· Furniture & Related Products.
The two industries reporting contraction in January are: Textile Mills; and Nonmetallic Mineral Products.
Falling oil and gas prices cut both ways
Because much of manufacturing is an energy intensive activity, respondents were asked what they felt about falling oil/energy prices. Every month, members of the Business Survey Committees are asked to comment about relevant issues facing their worksite.
In October only 2.3% of respondents had anything to say about oil or energy. Less than 0.6% of comments were about oil and energy in a positive way, typically referring to possible additional demand for their offerings due to more disposable income and the continued strength of their manufacturing sub-sector. The 1.7% of comments that were negative conveyed concern about shortages of feed stocks, lack of correlation between the price of plastics and crude, price volatility itself disrupting markets (mentioned by an oil/gas producer), and falling oil prices dampening demand for alternative energy technologies.
In November only 2.1% mentioned oil or energy. A small handful only noted that oil prices had declined while the other 1.8% were more substantive. Overall, 1.2% were positive about the oil price decline and mentioned lower prices helping their bottom line, generally stimulating the economy, and bringing down the prices of plastics. On the negative side, oil/gas producers warned that depressed prices are forcing changes to their capital expenditures plans and chemical manufacturers mentioned that the current price environment (November) was accelerating the decline in prices for their products.
December was a different story. The proportion of oil/gas related comments increased to 6.7 percent overall. 3.1% were mostly positive while 2.8% spoke to the negative impacts of the decline in prices.
Sentiments expressed in December pointed to the double-edged sword that is falling oil/gas prices. While in October and November, only general comments were made, in December, comments were made in the production, new orders, and exports areas of the survey as well.
January saw the proportion of oil/gas related comments holding almost steady at 6.1 percent overall. Again, 3.2% were mostly positive, and 2.5% spoke to the negative effects of this trend. On the downside, the negative comments are becoming a bit darker. There are comments about impacts on growth and investment plans and earnings forecasts and the injection of the unknown into their operating environment. Respondents mention buyers demanding reductions or holding orders in anticipation of still lower prices. An apparent tightening of cash is prompting a few businesses to request rate reductions from their suppliers. Sentiments expressed in January again illustrated that falling oil/gas prices cut both ways.
The pros and cons of the downturn in pricing for oil and gas are becoming more evident. The good news is that there are few surprises (either good or bad) regarding how this change in price is playing out through the economy. However, if current trends continue, we may begin to see new, experimental strategies and tactics as to how to survive and grow in a lower price environment as beleaguered oil and gas related firms struggle to move forward.
What respondents said
· “Strong customer demand for our products continues to grow.” (Food, Beverage & Tobacco Products)
· “Customers are presenting many new opportunities.” (Fabricated Metal Products)
· “Consumer demand remains strong for automotive. Seeking alternatives to maximize production with existing production capacity.” (Transportation Equipment)
· “Chinese New Year, West Coast port dock slowdowns, coupled with railroad embargo are all creating logistical challenges and increased backlog of orders.” (Wood Products)
· “Sales have stayed very strong even with the dip in oil prices.” (Computer & Electronic Products)
· “Dock problems in California continue to delay shipment out of the West Coast. Most material prices are the same except resin prices are down.” (Chemical Products)
· “Business conditions are good, stable to improving.” (Miscellaneous Manufacturing)
· “West Coast port slowdown is getting serious. Mill has 40+ days of production at the ports and various warehouses.” (Paper Products)
· “Agriculture equipment production remains weaker than previous year as farm commodity prices remain low.” (Machinery)
· “Business in 2015 has started off on a fast pace. Very busy.” (Primary Metals)
MANUFACTURING AT A GLANCE JANUARY 2015 |
||||||
Index |
Series Index Jan |
Series Index Dec |
Percentage Point Change |
Direction |
Rate of Change |
Trend* (Months) |
PMI® |
53.5 |
55.1 |
-1.6 |
Growing |
Slower |
20 |
New Orders |
52.9 |
57.8 |
-4.9 |
Growing |
Slower |
20 |
Production |
56.5 |
57.7 |
-1.2 |
Growing |
Slower |
11 |
Employment |
54.1 |
56.0 |
-1.9 |
Growing |
Slower |
19 |
Supplier Deliveries |
52.9 |
58.6 |
-5.7 |
Slowing |
Slower |
20 |
Inventories |
51.0 |
45.5 |
+5.5 |
Growing |
From Contracting |
1 |
Customers’ Inventories |
42.5 |
44.5 |
-2.0 |
Too Low |
Faster |
2 |
Prices |
35.0 |
38.5 |
-3.5 |
Decreasing |
Faster |
3 |
Backlog of Orders |
46.0 |
52.5 |
-6.5 |
Contracting |
From Growing |
1 |
Exports |
49.5 |
52.0 |
-2.5 |
Contracting |
From Growing |
1 |
Imports |
55.5 |
55.0 |
+0.5 |
Growing |
Faster |
24 |
OVERALL ECONOMY
Manufacturing Sector |
Growing |
Slower |
68 |
|||
Growing |
Slower |
20 |
Manufacturing ISM® Report On Business® data is seasonally adjusted for New Orders, Production, Employment and Supplier Deliveries indexes.
*Number of months moving in current direction.
COMMODITIES REPORTED UP/DOWN IN PRICE AND IN SHORT SUPPLY
Commodities Up in Price
Corn Based Products; and Electric Components (2).
Commodities Down in Price
Aluminum (2); Brass (2); Butter; Carbon Steel; Copper (6); Copper Based Products; Diesel* (4); Ethylene; Fuel Oil*; Gasoline* (4); HDPE Resin (2); Natural Gas*; Nickel; Oil* (2); Oil Based Products* (3); PET Resin (3); Plastic Resin (2); Polypropylene Resin (2); Scrap Steel (2); Stainless Steel (3); Steel (2); Steel – Cold Rolled; and Steel – Hot Rolled (3).
Commodities in Short Supply
No commodities were reported in short supply.
Note: The number of consecutive months the commodity is listed is indicated after each item.
* For additional information on the developing impact of declining oil prices, see the Addendum below.
JANUARY 2015 MANUFACTURING INDEX SUMMARIES
PMI
Manufacturing expanded in January as the PMI® registered 53.5 percent, a decrease of 1.6 percentage points when compared to December’s reading of 55.1 percent, indicating growth in manufacturing for the 20th consecutive month. A reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally contracting.
A PMI® in excess of 43.1 percent, over a period of time, generally indicates an expansion of the overall economy. Therefore, the January PMI® indicates growth for the 68th consecutive month in the overall economy, and indicates expansion in the manufacturing sector for the 20th consecutive month. Holcomb stated, “The past relationship between the PMI® and the overall economy indicates that the PMI® for January (53.5 percent) corresponds to a 3.3 percent increase in real gross domestic product (GDP) on an annualized basis.”
THE LAST 12 MONTHS
Month |
PMI® |
Month |
PMI® |
|
Jan 2015 |
53.5 |
Jul 2014 |
56.4 |
|
Dec 2014 |
55.1 |
Jun 2014 |
55.7 |
|
Nov 2014 |
57.6 |
May 2014 |
55.6 |
|
Oct 2014 |
57.9 |
Apr 2014 |
55.3 |
|
Sep 2014 |
56.1 |
Mar 2014 |
54.4 |
|
Aug 2014 |
58.1 |
Feb 2014 |
54.3 |
|
Average for 12 months – 55.8 High – 58.1 Low – 53.5 |
New Orders
ISM’s New Orders Index registered 52.9 percent in January, a decrease of 4.9 percentage points when compared to the December seasonally adjusted reading of 57.8 percent, indicating growth in new orders for the 20th consecutive month. A New Orders Index above 52.1 percent, over time, is generally consistent with an increase in the Census Bureau’s series on manufacturing orders (in constant 2000 dollars).
The 10 industries reporting growth in new orders in January — listed in order — are: Printing & Related Support Activities; Miscellaneous Manufacturing; Electrical Equipment, Appliances & Components; Paper Products; Primary Metals; Fabricated Metal Products; Transportation Equipment; Food, Beverage & Tobacco Products; Computer & Electronic Products; and Chemical Products. The four industries reporting a decrease in new orders during January are: Textile Mills; Furniture & Related Products; Petroleum & Coal Products; and Nonmetallic Mineral Products.
New Orders |
%Better |
%Same |
%Worse |
Net |
Index |
Jan 2015 |
24 |
59 |
17 |
+7 |
52.9 |
Dec 2014 |
25 |
57 |
18 |
+7 |
57.8 |
Nov 2014 |
38 |
47 |
15 |
+23 |
62.1 |
Oct 2014 |
34 |
52 |
14 |
+20 |
63.0 |
Production
ISM’s Production Index registered 56.5 percent in January, which is a decrease of 1.2 percentage points when compared to the seasonally adjusted 57.7 percent reported in December, indicating growth in production for the 11th consecutive month. An index above 51.1 percent, over time, is generally consistent with an increase in the Federal Reserve Board’s Industrial Production figures.
The eight industries reporting growth in production during the month of January — listed in order — are: Printing & Related Support Activities; Electrical Equipment, Appliances & Components; Primary Metals; Paper Products; Miscellaneous Manufacturing; Fabricated Metal Products; Computer & Electronic Products; and Chemical Products. The three industries reporting a decrease in production during January are: Textile Mills; Nonmetallic Mineral Products; and Food, Beverage & Tobacco Products. Seven industries reported no change in production in January compared to December.
Production |
%Better |
%Same |
%Worse |
Net |
Index |
Jan 2015 |
24 |
61 |
15 |
+9 |
56.5 |
Dec 2014 |
24 |
59 |
17 |
+7 |
57.7 |
Nov 2014 |
34 |
55 |
11 |
+23 |
62.6 |
Oct 2014 |
34 |
53 |
13 |
+21 |
62.8 |
Employment
ISM’s Employment Index registered 54.1 percent in January, which is a decrease of 1.9 percentage points when compared to the seasonally adjusted 56 percent reported in December. This is the 19th consecutive month of growth in employment. An Employment Index above 50.6 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) data on manufacturing employment.
Of the 18 manufacturing industries, in January, nine industries reported employment growth in the following order: Petroleum & Coal Products; Apparel, Leather & Allied Products; Printing & Related Support Activities; Miscellaneous Manufacturing; Primary Metals; Paper Products; Fabricated Metal Products; Food, Beverage & Tobacco Products; and Chemical Products. The four industries reporting a decrease in employment in January are: Nonmetallic Mineral Products; Computer & Electronic Products; Transportation Equipment; and Machinery.
Employment |
%Higher |
%Same |
%Lower |
Net |
Index |
Jan 2015 |
15 |
75 |
10 |
+5 |
54.1 |
Dec 2014 |
19 |
70 |
11 |
+8 |
56.0 |
Nov 2014 |
21 |
63 |
16 |
+5 |
54.6 |
Oct 2014 |
19 |
69 |
12 |
+7 |
55.2 |
Supplier Deliveries
The delivery performance of suppliers to manufacturing organizations slowed in January at a slower rate as the Supplier Deliveries Index registered 52.9 percent. This month’s reading is 5.7 percentage points lower than the seasonally adjusted 58.6 percent reported in December. A reading below 50 percent indicates faster deliveries, while a reading above 50 percent indicates slower deliveries.
The 10 industries reporting slower supplier deliveries in January — listed in order — are: Primary Metals; Plastics & Rubber Products; Transportation Equipment; Furniture & Related Products; Fabricated Metal Products; Computer & Electronic Products; Food, Beverage & Tobacco Products; Miscellaneous Manufacturing; Machinery; and Chemical Products. The two industries reporting faster supplier deliveries during January are: Printing & Related Support Activities; and Paper Products. Six industries reported no change in supplier deliveries in January compared to December.
Supplier Deliveries |
%Slower |
%Same |
%Faster |
Net |
Index |
Jan 2015 |
14 |
80 |
6 |
+8 |
52.9 |
Dec 2014 |
17 |
80 |
3 |
+14 |
58.6 |
Nov 2014 |
14 |
80 |
6 |
+8 |
57.0 |
Oct 2014 |
15 |
79 |
6 |
+9 |
56.1 |
Inventories*
The Inventories Index registered 51 percent in January, which is 5.5 percentage points higher than the 45.5 percent registered in December, indicating raw materials inventories are growing following one month of inventories contracting. An Inventories Index greater than 42.9 percent, over time, is generally consistent with expansion in the Bureau of Economic Analysis (BEA) figures on overall manufacturing inventories (in chained 2000 dollars).
The six industries reporting higher inventories in January — listed in order — are: Wood Products; Fabricated Metal Products; Machinery; Furniture & Related Products; Chemical Products; and Primary Metals. The seven industries reporting lower inventories in January — listed in order — are: Apparel, Leather & Allied Products; Nonmetallic Mineral Products; Plastics & Rubber Products; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Paper Products; and Food, Beverage & Tobacco Products.
Inventories |
%Higher |
%Same |
%Lower |
Net |
Index |
Jan 2015 |
21 |
60 |
19 |
+2 |
51.0 |
Dec 2014 |
17 |
57 |
26 |
-9 |
45.5 |
Nov 2014 |
21 |
61 |
18 |
+3 |
51.5 |
Oct 2014 |
21 |
63 |
16 |
+5 |
52.5 |
Customers’ Inventories*
ISM’s Customers’ Inventories Index registered 42.5 percent in January, a decrease of 2 percentage points from December when customers’ inventories registered 44.5 percent. January’s reading indicates that customers’ inventories are considered to be too low, and lower than December.
The two manufacturing industries reporting customers’ inventories as being too high during the month of January are: Nonmetallic Mineral Products; and Food, Beverage & Tobacco Products. The 10 industries reporting customers’ inventories as too low during January — listed in order — are: Textile Mills; Transportation Equipment; Apparel, Leather & Allied Products; Plastics & Rubber Products; Machinery; Electrical Equipment, Appliances & Components; Primary Metals; Paper Products; Computer & Electronic Products; and Miscellaneous Manufacturing.
Customers’ Inventories |
% Reporting |
%Too High |
%About Right |
%Too Low |
Net |
Index |
Jan 2015 |
62 |
9 |
67 |
24 |
-15 |
42.5 |
Dec 2014 |
62 |
10 |
69 |
21 |
-11 |
44.5 |
Nov 2014 |
61 |
13 |
74 |
13 |
0 |
50.0 |
Oct 2014 |
59 |
10 |
76 |
14 |
-4 |
48.0 |
Prices*
The ISM Prices Index registered 35 percent in January, which is a decrease of 3.5 percentage points compared to the December reading of 38.5 percent. In January, 11 percent of respondents reported paying higher prices, 41 percent reported paying lower prices, and 48 percent of supply executives reported paying the same prices as in December. This is the third consecutive month that raw materials prices have registered a decrease, with the Prices Index decreasing a total of 18.5 percentage points over these three months. A Prices Index above 52.1 percent, over time, is generally consistent with an increase in the Bureau of Labor Statistics (BLS) Producer Price Index for Intermediate Materials.
Of the 18 manufacturing industries, the only industry reporting increased prices in January is Printing & Related Support Activities. The 15 industries reporting paying lower prices during the month of January — listed in order — are: Textile Mills; Electrical Equipment, Appliances & Components; Plastics & Rubber Products; Petroleum & Coal Products; Paper Products; Apparel, Leather & Allied Products; Food, Beverage & Tobacco Products; Fabricated Metal Products; Chemical Products; Computer & Electronic Products; Furniture & Related Products; Machinery; Transportation Equipment; Primary Metals; and Miscellaneous Manufacturing.
Prices |
%Higher |
%Same |
%Lower |
Net |
Index |
Jan 2015 |
11 |
48 |
41 |
-30 |
35.0 |
Dec 2014 |
12 |
53 |
35 |
-23 |
38.5 |
Nov 2014 |
14 |
61 |
25 |
-11 |
44.5 |
Oct 2014 |
21 |
65 |
14 |
+7 |
53.5 |
Backlog of Orders*
ISM’s Backlog of Orders Index registered 46 percent in January, which is 6.5 percentage points lower than the 52.5 percent reported in December, indicating contraction in order backlogs following three months of growth in order backlogs. Of the 87 percent of respondents who reported their backlog of orders, 18 percent reported greater backlogs, 26 percent reported smaller backlogs, and 56 percent reported no change from December.
The three industries reporting increased order backlogs in January are: Wood Products; Primary Metals; and Fabricated Metal Products. The 11 industries reporting a decrease in order backlogs during January — listed in order — are: Textile Mills; Apparel, Leather & Allied Products; Miscellaneous Manufacturing; Transportation Equipment; Computer & Electronic Products; Furniture & Related Products; Electrical Equipment, Appliances & Components; Food, Beverage & Tobacco Products; Paper Products; Machinery; and Nonmetallic Mineral Products.
Backlog of Orders |
% Reporting |
%Greater |
%Same |
%Less |
Net |
Index |
Jan 2015 |
87 |
18 |
56 |
26 |
-8 |
46.0 |
Dec 2014 |
87 |
25 |
55 |
20 |
+5 |
52.5 |
Nov 2014 |
87 |
27 |
56 |
17 |
+10 |
55.0 |
Oct 2014 |
88 |
24 |
58 |
18 |
+6 |
53.0 |
Ne Export Orders*
ISM®‘s New Export Orders Index registered 49.5 percent in January, which is 2.5 percentage points lower than the 52 percent reported in December. January’s reading reflects a month of contraction in the level of exports, following 25 consecutive months of growth in new export orders.
The five industries reporting growth in new export orders in January are: Electrical Equipment, Appliances & Components; Computer & Electronic Products; Fabricated Metal Products; Food, Beverage & Tobacco Products; and Transportation Equipment. The six industries reporting a decrease in new export orders during January — listed in order — are: Textile Mills; Paper Products; Primary Metals; Machinery; Chemical Products; and Furniture and Related Products. Seven industries reported no change in new export orders in January compared to December.
New Export Orders |
% Reporting |
%Higher |
%Same |
%Lower |
Net |
Index |
Jan 2015 |
77 |
10 |
79 |
11 |
-1 |
49.5 |
Dec 2014 |
76 |
14 |
76 |
10 |
+4 |
52.0 |
Nov 2014 |
75 |
15 |
80 |
5 |
+10 |
55.0 |
Oct 2014 |
76 |
14 |
75 |
11 |
+3 |
51.5 |
Imports*
ISM’s Imports Index registered 55.5 percent in January, which is 0.5 percentage point higher than the 55 percent reported in December. This month’s reading represents 24 consecutive months of growth in imports.
The eight industries reporting growth in imports during the month of January — listed in order — are: Printing & Related Support Activities; Transportation Equipment; Fabricated Metal Products; Computer & Electronic Products; Machinery; Chemical Products; Food, Beverage & Tobacco Products; and Furniture & Related Products. The four industries reporting a decrease in imports during January are: Nonmetallic Mineral Products; Plastics & Rubber Products; Paper Products; and Primary Metals.
Imports |
% Reporting |
%Higher |
%Same |
%Lower |
Net |
Index |
Jan 2015 |
76 |
16 |
79 |
5 |
+11 |
55.5 |
Dec 2014 |
78 |
18 |
74 |
8 |
+10 |
55.0 |
Nov 2014 |
78 |
16 |
80 |
4 |
+12 |
56.0 |
Oct 2014 |
77 |
16 |
77 |
7 |
+9 |
54.5 |
* The Inventories, Customers’ Inventories, Prices, Backlog of Orders, New Export Orders and Imports Indexes do not meet the accepted criteria for seasonal adjustments.
Buying Policy
Average commitment lead time for Capital Expenditures decreased 1 day to 125 days. Average lead time for Production Materials decreased 4 days to 59 days. Average lead time for Maintenance, Repair and Operating (MRO) Supplies remained unchanged at 27 days.
Percent Reporting |
|||||||
Capital Expenditures |
Hand-to-Mouth |
30 Days |
60 Days |
90 Days |
6 Months |
1 Year+ |
Average Days |
Jan 2015 |
28 |
6 |
11 |
16 |
22 |
17 |
125 |
Dec 2014 |
26 |
6 |
11 |
17 |
24 |
16 |
126 |
Nov 2014 |
28 |
7 |
8 |
19 |
22 |
16 |
123 |
Oct 2014 |
29 |
6 |
11 |
18 |
21 |
15 |
118 |
Production Materials |
Hand-to-Mouth |
30 Days |
60 Days |
90 Days |
6 Months |
1 Year+ |
Average Days |
Jan 2015 |
17 |
36 |
22 |
16 |
7 |
2 |
59 |
Dec 2014 |
13 |
41 |
22 |
13 |
8 |
3 |
63 |
Nov 2014 |
18 |
36 |
23 |
14 |
7 |
2 |
58 |
Oct 2014 |
16 |
34 |
24 |
19 |
4 |
3 |
61 |
MRO Supplies |
Hand-to-Mouth |
30 Days |
60 Days |
90 Days |
6 Months |
1 Year+ |
Average Days |
Jan 2015 |
45 |
37 |
11 |
6 |
1 |
0 |
27 |
Dec 2014 |
47 |
33 |
14 |
5 |
1 |
0 |
27 |
Nov 2014 |
45 |
39 |
10 |
4 |
2 |
0 |
27 |
Oct 2014 |
45 |
39 |
9 |
6 |
1 |
0 |
27 |
The Manufacturing ISM Report On Business is based on data compiled from purchasing and supply executives nationwide. Membership of the Manufacturing Business Survey Committee is diversified by NAICS, based on each industry’s contribution to gross domestic product (GDP). Manufacturing Business Survey Committee responses are divided into the following NAICS code categories: Food, Beverage & Tobacco Products; Textile Mills; Apparel, Leather & Allied Products; Wood Products; Paper Products; Printing & Related Support Activities; Petroleum & Coal Products; Chemical Products; Plastics & Rubber Products; Nonmetallic Mineral Products; Primary Metals; Fabricated Metal Products; Machinery; Computer & Electronic Products; Electrical Equipment, Appliances & Components; Transportation Equipment; Furniture & Related Products; and Miscellaneous Manufacturing (products such as medical equipment and supplies, jewelry, sporting goods, toys and office supplies).
Survey responses reflect the change, if any, in the current month compared to the previous month. For each of the indicators measured (New Orders, Backlog of Orders, New Export Orders, Imports, Production, Supplier Deliveries, Inventories, Customers’ Inventories, Employment and Prices), this report shows the percentage reporting each response, the net difference between the number of responses in the positive economic direction (higher, better and slower for Supplier Deliveries) and the negative economic direction (lower, worse and faster for Supplier Deliveries), and the diffusion index. Responses are raw data and are never changed. The diffusion index includes the percent of positive responses plus one-half of those responding the same (considered positive).
The resulting single index number for those meeting the criteria for seasonal adjustments (PMI, New Orders, Production, Employment and Supplier Deliveries) is then seasonally adjusted to allow for the effects of repetitive intra-year variations resulting primarily from normal differences in weather conditions, various institutional arrangements, and differences attributable to non-moveable holidays. All seasonal adjustment factors are subject annually to relatively minor changes when conditions warrant them. The PMI is a composite index based on the diffusion indexes of five of the indexes with equal weights: New Orders (seasonally adjusted), Production (seasonally adjusted), Employment (seasonally adjusted), Supplier Deliveries (seasonally adjusted), and Inventories.
Diffusion indexes have the properties of leading indicators and are convenient summary measures showing the prevailing direction of change and the scope of change. A PMI® reading above 50 percent indicates that the manufacturing economy is generally expanding; below 50 percent indicates that it is generally declining. A PMI in excess of 43.1 percent, over a period of time, indicates that the overall economy, or gross domestic product (GDP), is generally expanding; below 43.1 percent, it is generally declining. The distance from 50 percent or 43.1 percent is indicative of the strength of the expansion or decline. With some of the indicators within this report, ISM® has indicated the departure point between expansion and decline of comparable government series, as determined by regression analysis.
The Manufacturing ISM Report On Business is published monthly by Institute for Supply Management. ISM is a not-for-profit educational association that serves professionals with an interest in supply management who live and work in more than 80 countries. This report has been issued by the association since 1931, except for a four-year interruption during World War II.
SOURCE Institute for Supply Management