Constructing Off-Center Toroids in SOLIDWORKS
Sam Sanchez posted on September 10, 2015 | 6339 views

An off-center toroid is easy to design using circular paths and guide curves with the Sweep feature in SOLIDWORKS.

In the tutorial video above, we’re presented with a step-by-step process of designing an off-center toroid.

To begin, create a circular sketch, which will become the path for the sweep.

Next, create a second circular sketch on the same plane sketch that will be used as a guide curve. Give the center points of the two circles a horizontal relation.

A third and final sketch will act as a profile for the sweep and can be created on any plane relative to the previous circles’ sketch planes. Place a single sketch point along the circumference of this circle.

To position the circle, add a pierce relation along the center point of the circle and a larger circle sketched earlier. Add a pierce relation between the sketch point and the smaller circle to fully define the profile sketch.

Exit this menu and launch the Sweep feature. Click OK and the off-center toroid is complete.

The guide curve can even be created with the Freeform feature for more interesting shapes, as long as it remains mostly circular. By using a circular path and combining it with a guide curve, you can create complex revolves where both the shape and axis of rotation can be controlled.

You can continue to develop your CAD, CAM & BIM skills by signing up for a free membership at

About the Author

Sam Sanchez is an Applications Engineer with SolidProfessor and a CSWP. Sanchez is an alumni of UC San Diego, and in her free time enjoys 3D printing and hanging out with her dog Ruby. You can see more training videos on a wide range of CAD, CAM& BIM topics

Recommended For You