3D Systems’ technology produces implants for cranial surgeries

3D Systems recently announced that a patient-specific 3D-printed cranial implant produced with its point-of-care technologies was successfully used in a cranioplasty at the University Hospital Basel (Switzerland). Under the leadership of Prof. Florian Thieringer, head of the Medical Additive Manufacturing Research Group (Swiss MAM) at the University Hospital Basel’s Department of Biomedical Engineering (UNIBAS DBE), and the Department of Oral and Maxillofacial Surgery (OMFS), in collaboration with Prof. Raphael Guzman and the Department of Neurosurgery, the team employed 3D Systems’ technologies to produce the first cranial implant at the point of care that complies with the current Medical Devices Regulations (MDR).

Example of a cranial implant produced using Vestakeep i4 3DF PEEK by Evonik on 3D Systems’ EXT 220 MED extrusion platform. Image courtesy of 3D Systems.

3D Systems’ extrusion printing technology is unique as its architecture and design are easy to use to produce durable, biocompatible implants using Polyetheretherketone (PEEK) material. Additionally, the technology enables the production of patient-specific geometries at the hospital itself, providing tremendous benefits to both surgeons and patients. The implant created by the team at University Hospital Basel was used to successfully replace a section of disintegrating skull in a 46-year-old male who was experiencing complications from a stroke in 2019.

When the patient first entered Prof. Guzman’s care, he was experiencing visual disturbances, severe headaches, and dizziness, and his forehead was sinking due to a disintegrating skullcap. The University Hospital Basel team, under the guidance of Dr. Neha Sharma, Ph.D., first took a computed tomography (CT) scan of the patient’s skull and imported that into software to create a model of the implant customized to his unique anatomy. The implant was then produced in the Hospital’s 3D printing lab using Vestakeep i4 3DF PEEK by Evonik on 3D Systems’ EXT 220 MED extrusion platform. PEEK is a very desirable material for such applications due to its mechanical properties — lightweight, resistant to thermal and ionizing radiation, and similar to human bone. 3D Systems’ printing technology has been uniquely engineered to enable healthcare applications within sterile environments.

“The successful implantation at the University Hospital of Basel is a pivotal moment for medical 3D printing, demonstrating its potential to revolutionize patient care,” said Prof. Thieringer. “Our collaboration with hospitals across Europe, along with the invaluable expertise provided by POC APP AG around QMS and regulatory guidelines, showcases the power of advanced technology and collaboration in improving healthcare outcomes.”

3D Systems’ point-of-care solution was also successfully used by a team at Salzburg University Hospital, Department of Oromaxillofacial Surgery, to produce a patient-specific cranial implant for a 55-year-old male, Mr. Rainer Trummer, who suffered from craniosynostosis — one of the cranial bones ossified too early during childhood, resulting in a deformation of the skull. These technologies were brought together by the hospital’s in-house clinicians to successfully address the patient’s needs, providing a customized solution that best positioned the team for success. The hospital used Oqton’s D2P software to create 3D models from the patient’s CT images and Oqton’s Geomagic Freeform to complete the design of the patient-specific occipital prosthesis. The cranial implant was printed using Vestakeep i4 3DF PEEK by Evonik on 3D Systems’ EXT 220 MED extrusion platform.

The solution has also been successfully deployed at the Department of Neurosurgery, University Hospital Salzburg, for patient-specific implants after decompressive craniectomy, which is regularly performed for aggressive brain swelling. According to Prof. Christoph Griessenauer, chairman of the department for neurosurgery in Salzburg, 40 decompressive craniectomies are performed in Salzburg annually. After the swelling subsides, the bone is replaced with a patient-specific cranioplasty implant. So far four cranioplasty surgeries have been performed within the last month, and multiple more are planned for the future.

“We are proud now to use for the first time a patient-specific cranial implant printed at our hospital,” said Griessenauer.

One of the departments’ senior attendings, Dr. Pöppe, was spearheading this effort from the clinical side.

“This revolutionary procedure showcases the power of medical 3D printing in providing personalized solutions that adhere to regulatory standards. The success of these procedures marks a significant step forward in the integration of 3D printing into routine clinical practice,” said Dr. Pöppe.

It is anticipated that the use of 3D-printed cranial implants will accelerate based on the availability of advanced technologies. According to a report released by Acumen Research and Consulting in February 2023, the cranial implants market size in 2021 was roughly $1.2 billion and is anticipated to approach $2.1 billion by 2030. Cranial implants can address a breadth of applications including trauma, defects, and reconstruction. The continued innovation in materials and manufacturing methodologies such as 3D printing are expected to enable new solutions to catalyze growth in this market.

3D Systems
3dsystems.com

Written by

Rachael Pasini

Rachael Pasini is a Senior Editor at Design World (designworldonline.com).