Georgia Tech Researchers Advise DIY Mask Makers with Advanced Aerosol Instrumentation
Jessica Zimmer posted on May 01, 2020 |
Georgia Tech researchers provide advice to DIY face mask makers use.
(Image courtesy of Georgia Tech.)

Since late March, a team of Georgia Institute of Technology (Georgia Tech) researchers have been providing recommendations for readily available materials to use as filters in homemade face masks. The “Rapid Response” team, which includes Georgia Tech faculty, research staff and students, is providing advice that includes its understanding of the chemical and mechanical properties of filter materials as well as results of tests conducted on advanced aerosol chemistry equipment from a climate change lab. Other Georgia Tech teams are working to write directions and files for 3D printers to help commercial manufacturers create emergency ventilators, plastic surgical shields, and gowns.

All the Georgia Tech teams working on health care-related items are incorporating suggestions and feedback from doctors and supply chain managers at Atlanta area hospitals, including Children’s Healthcare of Atlanta, the Emory Healthcare Network, Piedmont Healthcare, and Kaiser Permanente.

Ryan Lively, a member of the Rapid Response team and an associate professor of chemical and biomolecular engineering at Georgia Tech, said the face masks are intended for non-health care workers in everyday environments like city streets.

Lively mentions one of the best materials to use as a filter in a homemade 3D-printed mask is a high-performance particulate air (HEPA) furnace filter that is certified to not contain fiberglass. This type of filter works best when placed between two blocking layers of nonwoven fabric. 

“Avoid fiberglass HEPA filters, as they can cause acute respiratory issues." He quotes. 

Moving forward, he mentions a good choice for the outer shell of a homemade mask is a square piece of fabric from a reusable polypropylene grocery bag that lacks a shiny film. Polypropylene, which is the material used in plastic drinking straws, blocks droplets in exhaled air that could contain the virus responsible for COVID-19.

“A DIY mask helps reduce the quantity of the virus released by the wearer. Larger droplets have the potential to contain more virus particles. You want your mask to block as many of these as possible,” says Mark Losego, a member of the Rapid Response team and an assistant professor of materials science and engineering at Georgia Tech.

Losego suggests DIY mask makers can test their creations by spraying through the mask with a water spray bottle. He further expands: 

“The water simulates the droplets in a sneeze or cough. Not all fabrics impede water equally. In some fabrics, a lot of water goes through. Those are ones to avoid.” 

Why Aerosol Instrumentation Is Neededmaterials

Georgia Tech is able to run lab tests on these materials because it has advanced aerosol instrumentation, including the Scanning Mobility Particle Sizer (SMPS). The professor using this and other equipment to better understand aerosols is Nga Lee (Sally) Ng, an associate professor who holds a joint appointment in chemical and biomolecular engineering and earth and atmospheric sciences at Georgia Tech.

Ng is currently performing tests with the help of two Georgia Tech doctoral students, Taekyu Joo and Masayuki Takeuchi. The three team members are engaging in tests at a safe distance from one another to ensure their safety.

Aerosols are materials like bacteria and bits of carbon that float in the air. Prior to the pandemic, Ng’s work focused on understanding how the amount of aerosols in the air that is released by trees in the southeastern U.S. is controlled by human-caused emissions of other compounds like sulfur dioxide. Sulfur dioxide is primarily emitted from fossil fuel combustion at power plants. 

Data from studies done outside Dr. Ng's lab suggest that people are infected by the virus after a long exposure to high concentrations of the virus in a relatively closed environment. Ng has set up the SMPS and other instruments in her lab to emulate National Institute for Occupational Safety and Health (NIOSH) filtration experiments. This allows her to see how commonly available materials proposed for use as DIY filters reduce the concentration of aerosol particles like that of the virus responsible for COVID-19.

Katherine Copenhaver, a member of the Rapid Response team and a research engineer at the Georgia Tech Research Institute, said that Ng’s tests are revealing the wide range of capabilities of different filters.

Lively states that the SMPS work explains which masks are not as powerful as others and why people must engage in practices like social distancing in addition to wearing a mask. 

“The vast majority of folks don’t need a N-95 mask. DIY masks will suffice. Only those who are in direct, continuous contact with people with COVID-19 need N95s. The work we’re doing allows people to create the best mask they can with what they have." 

You can watch the video below. 

For the latest Georgia Tech findings, please visit their website

Recommended For You