The Great Wall of China The Engineer
posted on October 17, 2006 |
| 28827 views
The Great Wall started as earth works thrown up for protection by different States. The individual sections weren't connected until the Qin dynasty (221-206 B.C.). Qin Shihuangdi, First Emperor of Qin began conscripting peasants, enemies, and anyone else who wasn't tied to the land to go to work on the wall. He garrisoned armies at the Wall to stand guard over the workers as well as to defend the northern boundaries. The tradition lasted for centuries. Each dynasty added to the height, breadth, length, and elaborated the design mostly through forced labor.
It was during the Ming dynasty (1368-1644) that the Wall took on its present form. The brick and granite work was enlarged and sophisticated designs were added. The watch towers were redesigned and modern canon were mounted in strategic areas. The Portuguese had found a ready market for guns and canon in China, one of the few items of trade that China didn't already have in abundance. The Ming Emperors, having overthrown the Hun dominance and expelled their Mongol rulers of the North devoted large portions of available material and manpower to making sure that they didn't return.
Throughout the centuries, armies were garrisoned along the length of the Wall to provide early warning of invasion and a first line of defense. Great piles of straw and dung used to build signal fires have been found during excavations. There must have been small garrison towns spotted along the length. There weren't many farms or trade towns to provide ease, relaxation and food. The supply trails were over mountains along narrow paths. To bring supplies to the top, ropes were slung over posts set in the Chinese side of the wall and baskets were hauled up hand over hand. Supplies must have always been short and chancy, particularly in the winter.
The Wall served well. Only when a dynasty had weakened from within were invaders from the north able to advance and conquer. Both the Mongols (Yuan Dynasty, 1271-1368) and the Manchurians (Qing Dynasty,1644-1911) were able take power, not because of weakness in the Wall but because of weakness in the government and the poverty of the people. They took advantage of rebellion from within and stepped into the void of power without extended wars.
Over the past few centuries, the Great Wall has served as a source of building materials for local farms and villages. Aerial photos show that in sections, only the top battlements show — the center of the wall has filled with sand and silt. The same brutal isolated conditions which made the Great Wall a triumph of engineering and determined planning make restoration problematic and slow.
Design of the fortifications
The Great Wall had three major components: passes, signal towers (beacons), and walls.
Passes: were major strongholds along the wall, usually located at such key positions as intersections with trade routes. The ramparts of many passes were faced with huge bricks and stones, with dirt and crushed stones as filler. The bastions measured some 30 feet (10 metres) high and 13 to 16 feet (4 to 5 metres) wide at the top. Within each pass were access ramps for horses and ladders for soldiers. The outside parapet was crenellated, and the inside parapet, or yü-ch'iang (nu-ch'iang), was a low wall about 3 feet (1 metre) high that prevented people and horses from falling off the top. was often topped by a tower used to watch those beyond the wall and to direct troop movements in battles waged there. Around the gate entrance there was often a moat that was formed in the process of digging earth to build the fortifications.
Signal towers: were also called beacons, beacon terraces, smoke mounds, mounds, or kiosks. They were used to send military communications by beacon (fires or lanterns) during the night or by smoke signals in the daytime; other methods such as raising banners, beating clappers, or firing guns were also used. Signal towers, often built on hilltops for maximum visibility, were self-contained high platforms, or towers. The lower levels contained rooms for soldiers, as well as stables, sheepfolds, and storage areas.
Walls: the body of the wall was the key part of the defensive system. It usually stood 21.3 feet (6.5 metres) wide at the base and 19 feet (5.8 metres) at the top, with an average height of 23 to 26 feet (7 to 8 metres), or a bit lower on steep hills. The structure of the wall varied from place to place, depending on the availability of building materials. Walls were made of tamped earth sandwiched between wooden boards, adobe bricks, a brick and stone mixture, rocks, or pilings and planks. Some sections made use of existing river dikes; others used rugged mountain terrain such as cliffs and gorges to take the place of man-made walls.