The Engineer posted on November 10, 2006 | | 13218 views

Ohm's law was named after George Simon Ohm (1787 — 1854). It states that for many materials (including most metals), the ratio of the current density to the electric field is a constant, that is independent of the electric field producing the current.A courant density and an electric field E are established in a conductor when potential difference is maintained across the conductor. If the potential difference is constant, the current is also constant. Very often, the current density is proportional to the electric field: |

Where the constant of proportionality is called conductivity of the conductor. |

A form of Ohm's law useful in practical applications can be obtained by considering a segment of a straight wire of cross-sectional area A and length . A protential difference V = Vl_{b} - V_{a} is maintained across the wire, creating an electric field in a wire and current. If the electric field in the wire is assumed to be uniform, the potential difference is related to the electric field through the relationship |

A form Therefore, the magnitude of the current density in the wire can be expressed as |

Since, the potential diffence can be written |

The quantity l A is called the resistance R of the conductor. It is defined as the ratio of the potential difference across the conductor to the current |

This relationship is referred to as the basic law in electric circuits, the Ohm's law.The SI unit of resistance (R), which is called the ohm , is in fact a derived unit, related to the voltage and current units through |