To ask an engineering question please visit our forum site at Eng-Tips.

Browse our archive of questions and answers below or to access our old forum database of over 10000 questions and answers please visit the old Ask@ forum.

Charcoal Ball Press Machine/Fote Charcoal Briquetting Machine/32Charcoal Briquette Machine
Last Post 23 Jul 2015 10:55 PM by li ling. 0 Replies.
AddThis - Bookmarking and Sharing Button Printer Friendly
PrevPrev NextNext
You are not authorized to post a reply.
Author Messages Resolved
li ling
New Member
New Member

23 Jul 2015 10:55 PM
    Charcoal Ball Press Machine, Fote Charcoal Briquetting Machine, 32Charcoal Briquette Machine

    Raw Materials Suitable for Charcoal Briquetting

    * Fine agro-forestry waste materials such as sawdust, crop straw, wood branches, rice hull, bamboo sawdust, peanut shell and sunflower shell, etc.

    * Wood wastes during logging such as a log ends, stumps, branches, twigs, barks and trimmings;

    Charcoal Production Line Features

    1. Reasonable design, convenient operation, labor and energy saving.

    2. Automatic control of electric heating device, randomly adjust the humidity of materials to ensure the material molding stability, improving work efficiency.

    3. The main parts of the machine adopt wear-resistant material with special treatment and heavy-duty design.

    4. Applicable to all kinds of biomass raw materials, high production efficiency.

    5. Oil-immersed lubrication system ensures a long working life.

    6. Increased screw pitch of charcoal briquette press makes contribution to the feeding quantity, thus greatly improving the yield.

    7. Improved structure design of the molding cylinder has greatly reduced the frictional force between charcoal briquette machine and raw materials as well as increased the briquettes density.

    Request for raw materials

    1. In order to ensure the good quality and mechanical strength of the final product, special care should be taken to ensure that the granulesize fed to the machine is maintained below 3mm, preferable in the range of40% small than 1mm, with no more than 10% over 2mm.

    2. The moisture content of the mixture has also a critical effect on the quality of the final product, so it should be kept in the range of 8-20%.
    You are not authorized to post a reply.